Kongsberg M3 Sonar Reference Manual Download

Page: 41 / 182

922-20297001/1.2

Click the

TVG

button.

This button is located on the tool bar.

Drag the sliders to adjust the A, B, C, and L Factors.

Click the arrow buttons to make small adjustments.

Click

Apply

to save the settings.

Note

The TVG profiles will not be saved when closing the software — default values will
apply when starting up the M3 Sonar FLS software.

Related topics

TVG Setup dialog box, page 157

Setting up external sensors

If you wish to add external sensors (such as a GPS to provide navigation information) to
your system, you will need to add them on the

Sensors Setup

page. You will also need to

set the sensor properties so that the M3 Sonar FLS software communicates properly with
your sensor.

Prerequisites

Make sure that your external sensors are installed and physically connected to the M3
Sonar FLS system with the proper cables.

Operating procedures

Summary of Contents for M3 Sonar























































































































































































Search results

Summary of Contents for M3 Sonar

Reviews:

Related manuals for M3 Sonar

Brands by name

Popular brands

Kongsberg M3 Sonar, Reference Manual

Search results

Summary of Contents for M3 Sonar

Reviews:

Related manuals for M3 Sonar

Brands by name

Popular brands