Kongsberg M3 Sonar Reference Manual Download

Page: 38 / 182

922-20297001/1.2

Procedure

Use the

Display Widget

to adjust the sonar view according to your preferences.

Click the

Display Widget

icon.

This icon is located in the
lower-right corner of the sonar view.

Click one of the buttons to select
a frequency (in kHz).

Frequency buttons are available in
the

Display Widget

only if the Sonar

Head is running. In addition, these
buttons will not appear in playback
mode.

To adjust the strength of an
enabled filter in the sonar view
(such as Average Filter or Edge
Enhancement), drag the

Filter

slider

to increase or decrease the filter effect.

Note

The

Filter

slider will not appear if no filters are enabled. Note that filter settings

will not be saved when the software is closed.

To adjust the display gain manually, check the box and drag the

Gain

slider to

increase or decrease the gain.

Display Gain

controls the "amount" of echo that is displayed, in other words the

"strength" or "intensity" of the echo presentation. Uncheck the box if you want the
software to adjust the gain automatically.

Note

Adjusting the display gain manually will disable the

Sidelobe Reduction

function

(found in the

Display

menu).

Drag the

Contrast

slider to increase or decrease the sonar view display contrast.

To choose your echo colours, right-click on the

Palette

bar to cycle through the

colour scale options.

Which colour scale to use is mainly a personal preference based on ambient light
conditions, the nature of the echoes and your own experience.

Click the

Display Widget

icon to hide the widget.

M3 Sonar FLS Reference Manual

Summary of Contents for M3 Sonar























































































































































































Search results

Summary of Contents for M3 Sonar

Reviews:

Related manuals for M3 Sonar

Brands by name

Popular brands

Kongsberg M3 Sonar, Reference Manual

Search results

Summary of Contents for M3 Sonar

Reviews:

Related manuals for M3 Sonar

Brands by name

Popular brands