Kongsberg M3 Sonar FLS, Installation Manual

Page: 45 / 98

922-20297011/1.0
43
2 Insert the retaining-ring plier tips into the two holes in your replacement retaining ring.
3 Push the tips in as far as possible into the retaining-ring holes before squeezing the
plier handles.
4 Using minimal pressure, spread the retaining ring slightly apart and slide it over the
end of the dummy plug.
5 Move the retaining ring down to the second notch on the dummy plug (the notch
closest to the engaging nut).
6 Slowly release pressure on the pliers and ensure that the retaining ring snaps into the
notch.
Cable layout and interconnections