Kongsberg M3 Sonar FLS Installation Manual Download

Page: 29 / 98

922-20297011/1.0

Attaching the Sonar Head to a bracket

The Sonar Head is designed to attach to a mounting bracket.

Prerequisites

• To install the M3 Sonar FLS, you must have basic mechanical skills. We recommend two

people do the installation together.

• We assume that you are equipped with a standard set of tools. This tool set must comprise

the normal tools for mechanical tasks. This includes different screwdriver types, pliers,
adjustable spanners, etc. Depending on the chosen installation method, additional tools
may be required.

• For high-shock environments, use fasteners with A286 Super Alloy.

• You will need a mounting bracket that attaches to the M3 Sonar FLS. The type of

mounting bracket you need depends on how you intend to deploy the sonar.

Context

The following illustration is provided as an example.

Installing the Sonar Head

Summary of Contents for M3 Sonar FLS



































































































Search results

Summary of Contents for M3 Sonar FLS

Reviews:

Related manuals for M3 Sonar FLS

Brands by name

Popular brands

Kongsberg M3 Sonar FLS, Installation Manual

Search results

Summary of Contents for M3 Sonar FLS

Reviews:

Related manuals for M3 Sonar FLS

Brands by name

Popular brands