manualshive.com logo in svg

Kongsberg EM 712, Maintenance Manual

The Kongsberg EM 712 is a cutting-edge maritime sensor designed for precise underwater mapping. For hassle-free setup and installation, simply access the free Installation Manual available at our website. Download this comprehensive manual today for step-by-step instructions on setting up and optimizing your EM 712 device.

Share
Download
background image

222

451106/B

Index

19-inch rack installation kit

outline dimensions..................................... 126

1PPS

clock synchronisation ................................. 188
connection .............................................. 188

373897

power supply ............................................. 67

385387

fan unit .................................................... 68

A

about

document downloads ..................................... 9
online information ........................................ 9
purpose of this manual ................................... 9
target audience ............................................ 9
transducer ................................................. 14

ac mains power

requirements ............................................ 145

alignment

specifications ........................................... 149

alignment specifications

heading sensor.......................................... 149
motion sensor........................................... 149
position sensor ......................................... 150
transducer ............................................... 149
waterline determination ............................... 150

all

datagram format........................................ 135

anode

inspecting ................................................. 40
replacing .................................................. 40

anti-fouling paints

approved .................................................. 41
International Marine Coatings ......................... 41
Jotun ....................................................... 41

approved

anti-fouling paints ....................................... 41

approved anti-fouling paints............................... 41

International Marine Coatings ......................... 41
Jotun ....................................................... 41

audience

this manual................................................. 9

B

BIST

CBMF test ................................................ 25
CBMF-CPU link ......................................... 28
CPU test................................................... 24
RX channels .............................................. 30
RX noise level............................................ 32
RX noise spectrum....................................... 33
RX Unit test .............................................. 26
RX-CBMF link........................................... 29
SW date and version..................................... 34
System information...................................... 34
TX channels .............................................. 31
TX Unit test .............................................. 27

BIST (Built-In Self Test)

introduction ............................................... 23

BIST (Built-In Self test) dialog box

description ................................................ 19

block

diagram.................................................... 12

book

purpose ..................................................... 9
target audience ............................................ 9

bottom panel description

Transmitter Unit..................................... 89, 95

brief description

transducer ................................................. 14

Built-In Self Test

CBMF test ................................................ 25
CBMF-CPU link ......................................... 28
CPU test................................................... 24
introduction ............................................... 23
RX channels .............................................. 30
RX noise level............................................ 32
RX noise spectrum....................................... 33
RX Unit test .............................................. 26
RX-CBMF link........................................... 29
SW date and version..................................... 34
System information...................................... 34
TX channels .............................................. 31
TX Unit test .............................................. 27

C

cable drawing

1 pulse per second (1PPS) ............................ 188
remote control Processing Unit ...................... 192
remote control Receiver Unit ........................ 197
remote control Transmitter Unit ..................... 195
remote control using K-Rem ......................... 193
RS-232 serial line ...................................... 185
RS-422 serial line ...................................... 186

cable identification table

receive transducer...................................... 176
transmit transducer .................................... 170

cable marking

receive transducer...................................... 173
transmit transducer .................................... 168

cable plan

Hydrographic Work Station .......................... 163
Processing Unit ........................................ 154
Receiver Unit........................................... 160
topside ................................................... 163
Transmitter Unit........................................ 155

cables

list of system interconnection cables ................ 164
read this first ............................................ 152

casing

drawing............................................ 116–119

CBMF board

configuration.............................................. 86
connectors................................................. 87
description ................................................ 85
installing .................................................. 57

Kongsberg EM 712 Maintenance Manual

Summary of Contents for EM 712









































































































































































































































Reviews:

No comments

Related manuals for EM 712

Napoleon S1 Assembly Replacement Instructions preview
S1
Brand: Napoleon Pages: 2
Raytheon V800 Instruction Manual preview
V800
Brand: Raytheon Pages: 62
Qazqa Movie FL Black E27 Flaps Instruction Manual preview
Movie FL Black E27 Flaps
Brand: Qazqa Pages: 2
CAIRE FreeStyle Comfort Technical Manual preview
FreeStyle Comfort
Brand: CAIRE Pages: 33
Jackson DISHSTAR ADA-SEER Operation Manual preview
DISHSTAR ADA-SEER
Brand: Jackson Pages: 2
Uniden SOLARA DSC Manual Del Usuario preview
SOLARA DSC
Brand: Uniden Pages: 32
Uniden MHS125 Owner'S Manual preview
MHS125
Brand: Uniden Pages: 40
Uniden SUNDOWNER UH-011 Manual preview
SUNDOWNER UH-011
Brand: Uniden Pages: 10
Össur MIAMI J ADVANCED Instructions For Use Manual preview
MIAMI J ADVANCED
Brand: Össur Pages: 35
Össur LOCKING KNEE Instructions For Use Manual preview
LOCKING KNEE
Brand: Össur Pages: 38
Össur LIVINGSKIN User Manual preview
LIVINGSKIN
Brand: Össur Pages: 8
Össur LIVINGSKIN Instructions For Use Manual preview
LIVINGSKIN
Brand: Össur Pages: 72
Össur OH7 KNEE Instructions For Use Manual preview
OH7 KNEE
Brand: Össur Pages: 76
Össur Miami Lumbar Posteo Instructions For Use Manual preview
Miami Lumbar Posteo
Brand: Össur Pages: 45
Össur Innovator X Instructions For Use Manual preview
Innovator X
Brand: Össur Pages: 29
Össur Icelock Clutch 211 Instructions For Use Manual preview
Icelock Clutch 211
Brand: Össur Pages: 26
Össur i-limb hand Series Clinician Manual preview
i-limb hand Series
Brand: Össur Pages: 27
Össur i-Digits Quantum Instructions For Use Manual preview
i-Digits Quantum
Brand: Össur Pages: 231

Brands by name

Popular brands

Load more brands