Kongsberg EM 712, Maintenance Manual

Page: 182 / 232

182
451106/B
Hydrographic Work Station rear connectors
The rear panel on the Hydrographic Work Station holds connectors for the various EM
712 cables.
The image shows the MP5810 Fishery SIS5 model. Part number: 438803
If another model is used, the connections can be different.
A
Ethernet cable: From Hydrographic Work Station to local area network (LAN)
(C18)
B
Ethernet cable: From Hydrographic Work Station to local area network (LAN)
(C19)
C Ethernet cable: From Hydrographic Work Station to Processing Unit (C10)
It is very important that high-quality Ethernet cables are used. You must use
CAT-5E STP (Shielded Twisted Pair) quality or better. If you use cables with lower
bandwidth capacity you will reduce the EM 712 performance.
D
Display Port
Display cable: From Hydrographic Work Station to display (C1)
This is a commercial cable. The display cable is often physically attached to the
display, and terminated in the “computer end” with a male connector. If the cable
is not attached, it is normally provided with the display.
E
Video Port: DVI
F Display Port
G
Video Port: VGA
H
Serial cables: From Hydrographic Work Station to external device(s) (C14)
I Serial cables: From Hydrographic Work Station to external device(s) (C15)
J
Computer cable: From Hydrographic Work Station to mouse (or another similar
device) (C4)
The cable is often physically attached to the mouse, and terminated in the “computer
end” with a male PS/2 or USB connector. Depending on the type of connector you
must connect the mouse to the PS/2 connector or an USB connector on the computer.
Kongsberg EM 712 Maintenance Manual