Kongsberg EM 2040 MKII, Installation Manual

Page: 232 / 248

232
472405/A
far away from the bridge or any other rooms with wall-to-wall carpets! Whenever
possible, always bring a wristband and ground yourself.
2 Lift the circuit board or module, in its protective antistatic packing bag, out of
the transport box.
3 Place it in a stable position on the workbench.
4 Inspect the unit for damage.
a If a unit has been damaged, prepare an inspection report stating the condition
of the unit and actions taken.
b Describe the damage, and collect photographic evidence if possible. Return
the inspection report to Kongsberg Maritime as soon as possible.
5 Assuming all is well, open the bag and remove the unit.
Note
Do not break the seal to open a printed circuit board, an electronic module or a unit
before it shall be used. If the unit is returned with a broken seal we will assume that
it has been used. You will then be billed accordingly.
6 Take out and keep the documentation.
You will need the documentation if the item shall be returned to us.
7 Remove any packing and desiccant material that may be found inside the shipping
container or bag.
8 Keep the protective antistatic packing bag for future use.
Related topics
Transporting Kongsberg Maritime equipment, page 217
Packing instructions for storage or shipping, page 227
Returning a printed circuit board or an electronic module to Kongsberg Maritime,
page 232
About Electrostatic Discharge (ESD), page 234
Returning a printed circuit board or an electronic module
to Kongsberg Maritime
If you wish to return a printed circuit board or an electronic module to Kongsberg
Maritime - either operational or defective - certain rules apply.
Prerequisites
For correct and safe handling of printed circuit boards and electronic modules, you need
a suitable working area. The working area must be covered by an approved conductive
service mat that has a resistance of between 50 kΩ and 2 MΩ, and is connected directly
to a reliable earth point via its earthing cord. You - and all other service personnel
KONGSBERG EM 2040 MKII Installation Manual