Kongsberg EM 2040 MKII, Installation Manual

Page: 228 / 248

228
472405/A
4 Take the necessary precautions if the unit must be protected against high or low
temperatures, and mark the box accordingly.
5 Mark the box clearly to identify its contents.
6 Stored the box in a dry and dust-free area.
Related topics
Transporting Kongsberg Maritime equipment, page 217
Lifting units and transportation boxes, page 218
Unpacking and handling printed circuit boards and electronic modules, page 231
Returning a printed circuit board or an electronic module to Kongsberg Maritime,
page 232
About Electrostatic Discharge (ESD), page 234
Storage after use
If a unit is removed from its operating location and placed into storage, it must be
properly cleaned and prepared before packing.
Topics
Cleaning an electronic cabinet or unit, page 228
Cleaning a mechanical or electromechanical unit, page 230
Cleaning an electronic cabinet or unit
If an electronic cabinet has been exposed to salt atmosphere, it must be thoroughly
cleaned both internally and externally to prevent corrosion.
Prerequisites
In order to clean an electronic cabinet or unit, you will need relevant tools and detergents.
You will also need some amount of desiccant material.
Procedure
1 Wipe off the external surfaces of the unit using a damp lint free cloth and a mild
detergent.
Note
Do not use excessive amounts of water. The unit may not be water tight.
2 On completion, dry the unit thoroughly.
3 Inspect all surfaces for signs of corrosion, flaking, bubbling paint, stains etc.
KONGSBERG EM 2040 MKII Installation Manual