Kongsberg ACS500, Instruction Manual

Page: 90 / 148

Kongsberg ACS500
Interseal test
All seals that have been opened should be tested before the unit is deployed in water.
The interseal test kit is an optional kit for ACS500.
• Assemble the test kit on page 88
• Testing the seal on page 89
• Changing the battery in the Digital pressure indicator on page 90
A
Inlet for reservoir (not used)
B Outlet port (connect to Digital pressure
indicator)
C Volume adjuster
D Limit adjuster
E
Scissor-action handles
F Outlet port (connect to unit to be
tested)
G Selector valve
H Pressure relief valve
Assemble the test kit
Purpose
This procedure explains how to assemble the hand pump, the digital pressure indicator
and the relevant tube and fittings to test that a unit is properly sealed and watertight.
Procedure
1 Make sure there is an O-ring in the outlet port
B
.
2
Connect the Digital pressure indicator to outlet port
B
and use a spanner to tighten.
88
397128/C