Kongsberg ACS500, Instruction Manual

Page: 59 / 148

Operational procedures
Battery status
Read SCU remaining battery status capacity [%]. – Yellow background for value below
10 and 20%. Red background indicates less than 10 % remaining battery. Time to change
the battery! Alternatively try to use the other SCU Unit, check if this battery capacity is
more sufficient until next possible event convenient for battery change.
Sensor input
Output values available may be configured in different ways [%, mA, Psi etc..]. Normal
current sensor values should be in the area of 4 to 20 mA. The background colour will
illustrate OK, Alarm or Error values. – Green is shown for normal values. If an Alarm
limit is defined then the Alarm value will be shown with Red background colour. Yellow
Warning colour is shown when value is outside the 4 to 20mA area. If value <1 mA, Red
colour, then we may have an error with faulty or not connected sensor.
397128/C
57