Kongsberg ACS500, Instruction Manual

Page: 61 / 148

Operational procedures
Message Description Action
Failed Valve operation may be
executed correctly. Read
back status received is not
as expected. Check details including
current values in More
Status. Try to repeat
operation if possible.
Check sensors and
configuration values.
High Current Warning, Dark green
colour, this specific
operation is OK, but the
solenoid current measured
is above the defined upper
limit. Group B: Status will
be updated with a warning
message. Check current reading
valve in More status. If
the valve is significantly
outside the defined scope
then check the SCU system.
Low Current Warning, Dark green
colour, this specific
operation is OK, but the
solenoid current measured
is below the defined lower
limit. Group B: Status will
be updated with a warning
message. Check current reading
valve in More status. If
the valve is significantly
outside the defined scope
then check the SCU system.
Unknown This valve has not been
operated yet in the
operation window.
Not armed, Force? Operation of a normal
Valve, when the system
is not in ARM mode.
Warning to operator. Continue operation by
pressing the Execute
buttons for 5 seconds.
Valve already Armed.
Executed. Force? When a Valve is already
active (open) then an
attempt to execute it twice
will give this message. Continue operation by
pressing the Execute
buttons for 5 seconds.
Cancelled When Executing a Valve
function and then pressing
the Abort button will give
this message.
Timeout-Force? When starting up a
command and not receiving
acoustic confirmation from
SCU then we get a Timeout
warning. Proceed with ACU Execute
message by pressing
Execute buttons for 5
seconds. Alternatively,
repeat the complete
function.
397128/C
59