29
Assemble the arms
Assembly
M2-4 Low
Head Screw
M3-8 Low Head Horn Screw
Servo Bracket A
Attach the servo bracket A to the ID3(Red)
and ID3(Blue) servos. Since the origin is
already set, please pay attention to the
mounting position.
Servo Case Screw
(2-24 Low Head Tapping Screw)
2-5 Low Head Tapping Screw
Secure the ID2 servo to the unit with
the 2.5 Low Head Tapping Screws and
the Servo Case Screws.
* Before expansion, the 2-5 Low Head
Tapping Screws was used for this part, but
this time use M2-4 Low Head Screws.
