26
Assembly
Attach the Arm Supporter 2500A
Attach the Arm Supporter 2500A to each of the five servos used for expansion.
Attachment to ID3(Red) and ID3(Blue)
Attachment to ID5(Yellow) and ID5(Green)
Servo Case Screw
(2-24 Low Head Tapping Screw)
Servo Case Screw
(2-24 Low Head Tapping Screw)
2-5 Low Head Tapping Screw
Arm Supporter 2500A
Elbow Joint A
Assemble ID3(Red) and ID3(Blue) in the same way.
Attach the Arm Supporter 2500A with the 2-5 Low Head Tapping Screw.
Then remove the Servo Case Screws from the servo and attach the Elbow
Joint A using the same screws.
Arm Supporter 2500A
2-5 Low Head Tapping Screw
2-5 Low Head Tapping Screw
With the ZH Connection Cable
A (ZH / ZH) (200 mm) passed
through the Arm Supporter 2500
A, install the ID5( Yellow) and
ID5(Green) servos.
* The ZH Connection Cable A (ZH / ZH)
(200 mm) is included in the Conversion
set.
