29
90
Insulated screwdriver
Hole
5-2 Resetting the circuit protector
Apply an insulated screwdriver or the
like in the hole atop the PCB unit
(shown at right), and gently push the
white button inside.
5 Maintenance and annex
If an overcurrent or short-circuit occurs or if the PCB unit is given a strong shock, the circuit
protector will be automatically activated to protect the circuitry of the PCB unit. To reset the
circuit protector, turn OFF the machine’s power switch, unplug the power cord from the recep-
tacle, pinpoint and remove the cause, and press the button of the circuit protector. Then turn
ON the machine’s power switch again.
•Before resetting the circuit protector, be sure to turn OFF the machine’s power switch
and unplug the power cord from the receptacle.
•If the circuit protector trips soon again, immediately turn OFF the machine’s power
switch, unplug the power cord, and contact your nearest dealer.
•If the machine is in abnormal conditions and does not operate normally, immediately
turn OFF the machine’s power switch, unplug the power cord from the receptacle and
contact your nearest dealer.
Resetting the circuit protector
•Insert the insulated screwdriver right from
above.
MEMO
•With the circuit protector being activated, the reel vibrating motor does not work.
•Reset the circuit protector first and do the manual test on the “I/O CHECK” to see if the motor
functions.
MEMO
Summary of Contents for Bass Angler
