Konami Bass Angler, Operator'S Manual

Page: 5 / 37

3
Precautions for use
Setting Up
WARNING
•Be sure to follow the installation instructions. Wrong handling may cause a machine
trouble or accident. Contact a industry specialists or your nearest dealer for installing
this kit.
•Handle this kit with due care when installing it.
·Wrong handling may cause kit trouble or accident.
·Parts inside the kit get hot structurally. Do not touch them until completely
cooled down.
·This kit has some projections inside. Do not put your hand in the kit because
otherwise you may get injured.
•This kit is designed for indoor use. Do not install it in any machines that are
used outdoors.
·Outdoor use may cause an accident or kit trouble.
•Do not set up the game machine:
·Otherwise an accident or malfunction may result.
·In a place exposed to rain or moisture.
·In a place exposed to direct sunlight.
·In a place exposed to direct heat from air-conditioning and heating equipment, etc..
·Near hazardous flammable substances such as thinner and kerosene.
·In a place exposed to strong vibration.
·In a place exposed to excessive dust.
·Near equipment generating strong magnetism or electric waves.
•Do not place containers holding chemicals or water on or near the kit.
·Electrical shock or damage could be caused by water or foreign matter entering the
inside of the kit.
•Be sure to turn OFF the machine’s power switch before mounting and dismounting
the kit.
·Otherwise, a machine trouble or electric shock may result.
•Before installing the kit, clean up the inside of the machine using a vacuum
cleaner or the like.
·If the electrical components are left covered with dust, an electric shock or fire may
result.
•The PCB unit card edge connectors conform to the JAMMA standard requirements.
Never connect any other types of connectors than specified.
·Otherwise, a machine trouble or fire may be caused.
•In setting up the kit, identify all the connectors and connect them properly.
·Otherwise, a machine trouble or fire may be caused.
3
ENGLISH