14
Square opening
Disconnect the connectors
from the control panel
Accompanying
I/O cables
Cover
Stay
Panel
Control panel
Flange nut
(6positions)
2 Setting the kit in the machine
2
Open the machine’s control panel and
tilt up the cover until its stays get
locked.
3
Draw the end of the accompanying
I/O cables out of the square opening
as shown at right.
4
Close the machine’s cover with care
not to get the bundled cables caught.
Disconnect the connectors from the
control panel, as shown at right.
MEMO
5
Remove the 6 flange nuts and detach
the control panel.
•For opening the control panel and the
cover, refer to the machine’s instruction
Manual.
•On the “Windy
TM
” machine, the kit’s control
panel can be attached without having to
open the machine’s cover.
MEMO
•Holding the control panel by hand, loosen
the flange nuts.
•Support the control panel by hand not to
let it fall.
Summary of Contents for Bass Angler
