background image

TRIPLE TURN    Manual 

.1. 

 

 

 

This indicates risk that can lead to personal injury and/or property damage 

1.

 

SAFETY PRECAUTIONS 

Before using this game, read the following safety precautions thoroughly and use the 
game correctly. 
Be sure to observe the safety instructions as they are important for ensuring safe operation 
of the game.   
 
 

  

 

This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge,unless they have been 
given supervision or instruction regarding the use of the appliance by a person responsible 
for their safety. 
Children should be supervised while playing this game.   
 

 

When opening or closing the glass door, support the glass with one hand and avoid 
applying impact to the door during opening or closing. Careless handling of the glass 
door can result in the pinching of your hand or the breakage of the glass causing 
possible injury. 
When moving the machine, exercise caution and do not push the glass section. 
The glass used on the game is tempered safety glass, but it can break if excessive 
force applied, thus causing possible danger to yourself and people around the 
machine. 
Do not allow players to tilt, lift or drop the machine, or conduct any other improper 
action. Such action may cause the machine to tip over or the glass to break,thus 
causing danger to people around the machine. 
When installing the machine, use the leg levelers to ensure that machine does not 
move easily. lf the leg levelers are not adjusted properly, the machine can move if a 
light push is applied, thus causing possible danger to people around the machine. 
Be careful not to pinch your fingers when adjusting the leg levelers. 
The machine is very heavy. Do not place your hand under the machine. 
This machine is for indoor use only. Never use the machine outdoors as rain or dust 
can cause a short circuit or electric shock. 
To prevent possible electric shock due to failure, this equipment MUST be fitted with 
a securely connected GROUNDED plug. 
Install the power cord so that people cannot step on it or in such a way that could 
present a trip hazard. Route it under other machines or where it could be crushed. 
Do not unplug the power cord by pulling the cord, as could break internal wires and 
cause electric shock. 
Do not use power cord if it becomes damaged. 
If internal wires are exposed, replace the cord immediately; otherwise, a short circuit 
or electric shock can occur. 

Summary of Contents for TRIPLE TURN

































Reviews: