Kompernass 275078, Operating Instructions And Safety Instructions

Page: 18 / 108

CR 5 A2 ■ 14 │
GB
│
CY
Video standby mode
In video standby mode, the screen shows the following overview:
A – displays the remaining recording time depending on resolution and
available storage space
B – current video resolution
C – symbol to indicate an inserted microSD card
D – battery charge level of the internal battery
E – date display (only when the "Time & date stamp" is activated)
F – time display (only when the "Time & date stamp" is activated)
G – symbol for motion detection (only visible if the function is activated)
H – symbol for a loop recording as well as its length in minutes (here 3 minutes)
I – display for exposure correction
J – symbol for video standby
K – red dot flashes during recording
L – symbol for a write-protected file
Start / end recording
Press the / ▲ button repeatedly as required to zoom into the subject . Hold
down the button for fast zoom . You can use the / ▼ button in the same way to
zoom out . Press the
/ button to start the video recording . During the video
recording the operating display blinks green (battery operation only) . Press the
button again to stop the recording .
If you press the MODE button during recording, the
symbol is displayed and
the current recording will be write-protected .
NOTE
► As soon as the camera is connected to the vehicle's power supply, the recording
starts . To stop the recording, press the
/ button .