Kompernass 275078, Operating Instructions And Safety Instructions

Page: 14 / 108

CR 5 A2 ■ 10 │
GB
│
CY
Mounting the camera on the windscreen
1) Screw the cradle into the thread of
the camera Position the suction cup on the
windscreen . Ensure that the suction cup is
pressed on flat .
2) Place the suction cup firmly against the wind-
screen and press the suction cup locking
lever downwards towards the windscreen .
This creates suction, and the suction cup is
pulled tightly against the windscreen . Pull the
locking lever in the opposite direction to
release the suction cup from the windscreen .
The suction cup has a tab at the side, which
makes it easier to remove .
3) After attaching the camera with the suction
cup on the windscreen, loosen the knurled
screws and adjust the camera as per your
wishes .
4) Once you have found the desired position and orientation, retighten the knurled
screws .
CAUTION
► The camera must be positioned so that the driver's field of vision is not
obscured .
Providing electric power
CAUTION
► Use only the supplied car adapter to power your device .
1) Connect the car adapter to your vehicle's on-board power supply (cigarette
lighter) . The operating light on the car adapter indicates operational
readiness when the socket is live .
2) Connect the supplied mini-USB cable to the USB port on the car adapter
and the USB socket of the camera . As soon as the camera is powered by
the on-board power supply, the video recording starts and the operating display
lights up red . Once the internal backup battery is charging, the battery
charger symbol appears on the screen .