4
UAB KOMFOVENT we reserve the right to make changes without prior notice
RHP PRO_22-01
EN
1. INTRODUCTION
This Installation Manual is intended for professionals, qualified to install RHP PRO air handling units. Qualified profes-
sionals are people with sufficient professional experience and knowledge of ventilation systems and installation thereof,
knowledge of electrical safety requirements and having ability to perform works without endangering themselves or others.
See the KOMFOVENT website for user manuals.
1.1. Safety Requirements
To avoid misunderstandings, read this Instruction Manual carefully before installing air-handling unit.
Only a qualified professional in accordance with the manufacturer’s instructions and applicable legal acts and safety re-
quirements may install air-handling units. An air handling unit is an electrical-mechanical device that contains electrical and
moving parts, therefore, disregarding instructions of this manual will void the manufacturer’s warranty and may also cause
direct damage to property or human health.
•
Before starting any tasks, make sure that the unit is unplugged from the mains.
•
Use caution when performing works near internal or external heaters as their surfaces may be
hot.
•
Do not connect the unit to the mains unless all the external assemblies are installed completely.
•
Do not connect the unit to the mains in case of any visible damage incurred during transportation.
•
Do not leave foreign objects and tools inside the unit.
•
It is forbidden to operate air-handling units in areas with potentially explosive atmospheres.
•
Use appropriate safety equipment (gloves, goggles) when performing installation or repair
works.
•
Heat pump system is filled with refrigerant (F-gas), therefore only qualified refrigeration systems’
specialists or “Komfovent” representative can perform any mechanical/electrical works on a heat
pump.
•
Temperature of evaporating refrigerant is very low and causes severe frostbite in contact with
skin, therefore use appropriate safety equipment (gloves, goggles).
This symbol indicates that this product may not be disposed of with your household waste as specified
in WEEE Directive (2002/96/EC) and national laws. This product should be handed over to a designated
collection point or to an authorised collection site for recycling waste electrical and electronic equipment
(EEE). Improper handling of this type of waste could have a negative impact on the environment and human
health due to potentially hazardous substances that are generally associated with electrical and electronic
equipment. At the same time, your cooperation in the correct disposal of this product will contribute to
the effective usage of natural resources. For more information about where you can drop off your waste
equipment for further recycling, contact your city authorities, waste management organisations, approved
WEEE scheme or your household waste disposal service.
