45
UAB KOMFOVENT we reserve the right to make changes without prior notice
RHP PRO_22-01
To start or stop the device, press the on / off button in the “Overview” window.
6.3. Calibration of Clean Filters
RHP PRO control automation continuously monitors filter contamination. Pressure drop of clean filters is preset in the
factory. If filters are from another manufacturer or of different filtering class, we recommend performing initial calibration
of clean filters before commissioning of the unit. During calibration, the unit will operate at a maximum speed for a few
minutes, measure the pressure difference upstream and downstream the filter and automatically set the filter filtration class.
Calibration of clean filters with the control panel:
Start
calibration?
Calibration of filters with a computer:
Select Point “Warnings/States”:
If filters ordered with the unit are used (same manufacturer and filtration class), calibration of clean
filters is not required.
