6
UAB KOMFOVENT we reserve the right to make changes without prior notice
RHP PRO_22-01
EN
1.3. Unit Components and Sections
RHP PRO air handling units are assembled from separate sections. Depending on the order and unit size, sections may
be pre-assembled in a factory or transported separately. Type of each section is marked with a label attached to the section
door. The following are the main sections of the air handling unit. For equipment and number of sections in each unit see
the technical data print-out of the specific unit.
1.3.1. Filter-Fan Section
Air handling units have two filter-fan sections. Filter contamination is measured and fan is controlled by an electronic
circuit board fitted in the same section.
1
2
3
1
2
3
5
4
Fig. 1.
Filter-fan section
1 – fan assembly with an installation frame 2 – fan control board (C5_VM),
3 – bag filters, 4 – fan section label, 5 – filter section label
