Komatsu PC18MR-3, Operation & Maintenance Manual

Page: 162 / 284

USE OF THE MACHINE AND RELATED CONTROLS
160 WEAM012101
3. Lower the bucket horizontally until its bottom touches the
ground.
4. Lower the blade to the ground.
5. Shift the safety lever (3) to the “locked” position (L).
3.3.15 CHECKS TO BE CARRIED OUT
BEFORE STOPPING THE ENGINE
At the end of the working day, before turning the engine off, check
the engine water temperature in the indicator (1), the engine oil
pressure warning light (2) and the fuel level in the indicator (3).
3.3.16 CHECKS TO BE CARRIED OUT AFTER WORK
1. Walk around the machine, check the work equipment, the outside of the machine and the undercarriage, and
make sure that there are no oil or coolant leakages. If any anomaly is observed, provide for the necessary
repairs.
2. Fill the fuel tank.
3. Check the engine compartment for paper and debris. Remove any paper and debris to avoid a fire hazard.
4. Remove any mud that may be attached to the undercarriage.
RKA22990
RKA23990