Komatsu PC18MR-3, Operation & Maintenance Manual

Page: 111 / 284

INSTRUMENTS AND CONTROLS
WEAM012101
109
4. Position blocks under the tracks in order to prevent the ma-
chine from moving.
5. Open the engine hood (2) completely and make sure that it is
kept open by the apposite rod (for further details, see "3.2.6
ENGINE HOOD").
6. Loosen the fastening screws of the cab floor (3).
7. Remove the screws (4) fastening the roof to the rear ballast.
8. Lift the mat (5), pull the release lever (6) in the direction indi-
cated by the arrow and simultaneously push the platform (7)
upward in the direction indicated by the arrow (by approx.
45°).
IMPORTANT
q
When tilting or closing the cab floor, be extremely careful,
and keep away from the area under the cab floor.
NOTE
q
The cab floor tilts thanks to the operation of a gas cylinder, so
when the ambient temperature is low, the operating effort in-
creases.
9JA05466
RKA26000