Komatsu D51EXi-24, Operation & Maintenance Manual

Page: 95 / 194

1.
On the main window, press “iB logo key” and display the
main menu.
2.
On “File” menu, press “Projects...” and select.
3.
On “Project Files” screen, press “New...”.
4.
Press the input section for “Name”.
5.
Input “Name” of the project by using the alphanumeric key-
board.
6.
Press “Ok”.
REMARK
• When taking in the control points, localization, and
mmGPS data from the current project, put a tick on
the check box of “Control points, localization, MM-
GPS data”.
This machine does not use the mmGPS data.
• When taking in the connection setting of the Site-
link3D from the project, put a tick on the check box of
“Sitelink3D connection details”.
METHOD FOR EXPORTING A PROJECT FILE
When using a project file used in the control box for Pocket-3D or another application, export that project file to
USB memory or the internal memory of the control box.
REMARK
Pocket-3D is application software for GNSS specially designed for land survey. By inputting the survey points,
design surface data, alignment data, etc. in advance, you can easily navigate to survey points or cut positions,
or check the cut/fill amount easily while watching the screen.
AJD02553
AJD02558
HANDLE CONTROL BOX FILE MENU
4-11