Komatsu D51EXi-24 Operation & Maintenance Manual Download Page 139

Page: 139 / 194

On the main window, press “iB logo key” and display the
main menu.

On “Tools” menu, press “Sitelink3D” and “Network connec-
tion...” in order.

On “Sitelink3D Connection” screen, press “Registration...”.

The message “Please have your one-time Sitelink3D regis-
tration code ready. Press Ok to enter code...” is displayed.

Press “Ok”.

By using the numeric keyboard, input the one-time regis-
tration code issued with the WebPortal of Sitelink3D, and
press “Ok”.

• When the registration of code is succeeded

The message indicating the success of registration is
displayed.

• When the registration of code is failed

The error message is displayed.
Check the one-time registration code and press “Ok”
again.

After completing the registration, press the power supply
OFF switch of the control box, and press the power supply
ON switch again to actuate the control box.
The registered settings become effective.

HANDLE CONTROL BOX

TOOLS MENU

4-55

Summary of Contents for D51EXi-24


































































































































































































Search results

Summary of Contents for D51EXi-24

Reviews:

Related manuals for D51EXi-24

Brands by name

Popular brands

Komatsu D51EXi-24, Operation & Maintenance Manual

Search results

Summary of Contents for D51EXi-24

Reviews:

Related manuals for D51EXi-24

Brands by name

Popular brands