Komatsu D51EXi-24, Operation & Maintenance Manual

Page: 138 / 194

1.
On the main window, press “iB logo key” and display the
main menu.
2.
On “Tools” menu, press “Sitelink3D” and select.
“Sitelink3D” menu is displayed.
SETTING CONTENTS BY Sitelink3D MENU
On “Sitelink3D” menu, you can set the following.
(1) “Network connection...”
You can perform the setting for connecting the control box to
the Sitelink3D.
(2) “Operator” (*)
You can select the operator.
(3) “Activity” (*)
You can select the name of activity.
(4) “Delay” (*)
You can select the delay information.
(5) “Material” (*)
You can select the soil type information.
(6) “Export data...”
You can send the Surface file via network to the devices (control box, 3D-Office, etc.) which are connected to
the Sitelink3D.
(7) “View messages...”
You can view the received messages.
(8) “New message...”
You can send the message to the devices (control box, 3D-Office, etc.) connected to the same site of Site-
link3D.
(9) “Delete messages”
You can delete all the message history.
(10) “Tasks...”
You can open the task menu of the Sitelink3D.
(*): The list of information set at the WebPortal is displayed. Select the item from the list. For the item which is
not set at the WebPortal, only “<none>” is displayed.
METHOD FOR REGISTERING ON Sitelink3D
In order to register on the Sitelink3D, issue the one-time registration code with the WebPortal of Sitelink3D in
advance.
After issuing the one-time registration code, register the control box on the Sitelink3D according to the following
procedure.
TOOLS MENU HANDLE CONTROL BOX
4-54