Komatsu 75001, Shop Manual

Page: 525 / 1293

SEN03838-00
30-130
52
WA250, 250PZ-6
130 Testing and adjusting, Part 3
Special functions of machine monitor (EMMS)
2] Pressing [ U ] switch displays the cor-
rection screen.
a Default value: 0.0%
a This setting allows correcting the
cumulative fuel consumption in the
range of –50.0 to +50.0.
3] Move the cursor to [+] or [–].
4] Pressing [<] or [>] switch alternately
displays [+] and [–].
5] Press [ U ] switch to settle [+] or [–].
a The cursor moves to the highest-
order digit of the set value.
6] Pressing [<] or [>] switch changes the
value of this digit in the range of 0 – 9.
7] Press [ U ] switch when the intended
value appeared to specify it as the set
value.
a The cursor moves to the 2nd digit.
8] Set the values up to the lowest digit in
the same order as above and then
press [
U ] switch to settle.
a As the selection is settled, the pre-
ceding screen is restored.
a If [ t ] switch is pressed before finish-
ing entering, the cursor moves to the
[+] and [–] position. In this case, the
value remains unchanged. Pressing
[
t ] switch again restores the preced-
ing screen.
a
If the value is not in the –50 – +50
range, pressing [
U
] switch at the low-
est digit just moves the cursor the [+]
a n d [ – ] p o s i t i o n a n d t h e v a l u e
remains as it is.