Komatsu 75001, Shop Manual

Page: 523 / 1293

SEN03838-00
30-130
50
WA250, 250PZ-6
130 Testing and adjusting, Part 3
Special functions of machine monitor (EMMS)
7) As the timer stop for all items is executed:
a The timer function for all items is stopped
a n d t h e M A I N TE N A N C E M O N I TOR
screen is restored.
a Setting for individual items is also disabled.
a If cancelled: The operation is cancelled
a n d t h e M A I N TE N A N C E M O N I TOR
screen is restored.
8) When timer enable for all items is executed:
a Interval time being set for all items is exe-
cuted to the set value before disabled
i n d e p e n d e n t o f w h e t h e r o r n o t it i s
enabled or disabled for a specific item.
a The timer remaining time is reset. (The
reset frequency remains the same as
before the resetting.)
a The MAINTENANCE MONITOR screen is
restored.
a Setting for individual items is also enabled.
a If cancelled: The operation is cancelled
a n d t h e M A I N TE N A N C E M O N I TOR
screen is restored.
9. Operating information display function
It is a fuel consumption-related function and
displays the following information.
q
Fuel consumption ratio and average fuel
consumption
q
Cumulative fuel consumption and travel
distance
q
Cumulative fuel consumption and elapsed
time
q
Loaded volume and loading frequency
(This display is available only when the
load meter is installed.)
1) Selecting menu
Display the OPERATION INFO screen
from the menu screen of Service mode.
2) Press [ U ] switch to display the fuel con-
sumption ratio and average fuel consump-
tion screen.
3) Using [<] or [>] switch, select the item to
be displayed from 1] – 4] on the fuel con-
sumption ratio and average fuel consump-
tion screen.
1]
Fuel consumption ratio and average
fuel consumption screen
a The upper column displays fuel con-
sumption [L/km or L/mile] per 1 km (or
1 mile) from the last resetting.
q
Above value is computed from the
fuel consumption ratio and travel dis-
tance (odometer distance).
q
The counting is stopped at 99999.9,
the upper limit.
a The lower column displays the aver-
age fuel consumption [L/h] from the
last resetting.
q
The counting is stopped at 99999.9,
the upper limit.
a Calculation is done only for the dura-
tion in which the engine is run.
2] Cumulative fuel consumption and travel
distance
a The upper column displays the cumu-
lative fuel consumption [L] from the
last resetting.
q
The counting is stopped at 99999.9,
the upper limit.
a The lower column displays the travel
distance [km or mile] from the last
resetting.
q
The unit km or mile shall be selected
depending on that used on the odom-
eter.
q
The counting is stopped at 99999.9,
the upper limit.
a Calculation is done only for the dura-
tion in which the engine is run.