31
2. User Manual
When you route a CV signal from the CV Interface, you can control
the sequence in two different ways:
When the THRESH is in a fully counterclockwise position and you
route a gate, trigger or clock signal into it via the CV Interface, the
sequencer will move to the next step whenever there’s a rising edge
at the corresponding CV input. Clock or gate signals work best for
achieving a periodic sequence (fig. 2).
Fig. 1
Fig. 2
The Threshold knob (THRESH) with no CV applied works as a speed
control of the sequence: turning right speeds up the tempo (fig. 1).
Rising edge >
