17
2. User Manual
The GAIN IN controls the amount of signal sent into the effect. Center
position corresponds to unity gain. Next, use the CUTOFF control to
set the cutoff frequency of the filter. Use the FILTER control switch
to select either a low-pass (LP) or a band-pass (BP) response. After
the signal has travelled through the spring tank, the wet, reverberat-
ed signal comes out the Output. Finally, the FBACK control lets you
send the reverberated signal back into the input filter.
Both the CUTOFF and FBACK can be controlled via the CV Interface,
giving your hands the freedom to nudge and stroke the spring with
your fingers or play any instrument while the spring is doing its thing.
Please note: The Field Kit FX itself doesn’t have a build-in spring
reverb tank. You can use a whole scala of reverb tanks and connect
them to the TO and FROM. We offer a high quality reverb tank in our
FX Pack to get you going!
