12
Inputs
Control
Outputs
▪
AC coupled input for different kinds of audio sig-
nals.
▪
The signal is recorded at 12 bit resolution, 48KHz.
▪
Input impedance: 100k
Ω
(Eurorack standard)
SRR
▪
Decreases the sampling rate of the output audio.
CRUSH
▪
Sets the number of bits of the audio signal in the
looper’s memory.
▪
CV Range: ± 5V
AC coupled output
▪
Output impedance: 1K
Ω
(Eurorack standard)
Both SRR and CRUSH can be automated by the CV interface. Also,
both effects are applied to the audio output regardless of the looper’s
state. They do not become part of the recorded audio unless you also
recorded the loop with these effects engaged. This allows you to use
the looper of the Field Kit FX in an armed state as a real time bitcrush-
er and sample rate reducer.
DSP Input Gain Setting
You might have noticed that unlike the digital delay and the spring re-
verb, the DSP part of the Field Kit FX does not feature a Gain In knob.
Since you want to be able to accomodate signals with different vol-
umes there is a feature that lets you set the internal gain of the DSP
circuit. The DSP circuit includes the Looper, the Frequency Shifter, the
Sample Rate Reduction and the Bitcrusher.
2. User Manual
