Kolver 035001, Manual

Page: 36 / 64

Vers. 291020
36
21 0 1 0 1 0 1 53 1 1 0 1 0 1
22 0 1 0 1 1 0 54 1 1 0 1 1 0
23 0 1 0 1 1 1 55 1 1 0 1 1 1
24 0 1 1 0 0 0 56 1 1 1 0 0 0
25 0 1 1 0 0 1 57 1 1 1 0 0 1
26 0 1 1 0 1 0 58 1 1 1 0 1 0
27 0 1 1 0 1 1 59 1 1 1 0 1 1
28 0 1 1 1 0 0 60 1 1 1 1 0 0
29 0 1 1 1 0 1 61 1 1 1 1 0 1
30 0 1 1 1 1 0 62 1 1 1 1 1 0
31 0 1 1 1 1 1 63 1 1 1 1 1 1
64 Not Displayed
NB: To be aligned even with remote inputs Kolver chose not to display the program 64 on the
outputs.
CN4 male serial connector:
Used to connect printers or to Kolver accessories. When used with Kolver accessories, the print
string is also on CN2 (see dedicated paragraph on the print string).
PIN NAME FUNCTION
2 TX RS232 reception.
3 RX RS232 transmission.
5 GND
Common to every input. Signals have to be enabled making contact between
the desired signal and this pin (GND).
9 +5V Not used
IMPORTANT : RS232 with 9600baud, 8 data bits, 1stop bit, no parity, terminators CR-LF.