Kolver 035001, Manual

Page: 45 / 64

Vers. 291020
45
To move from one tab to another (Torque and Angle, Ramps and Time, Reverse and Pre-Reverse and Other),
it is sufficient to press on the desired tab. Each parameter is the same as the KDS unit with the same
characteristics. To change it, simply enter the cell, select a number in the correct range, then press Enter. Or
you can press the keyboard and type the desired value. The selection is saved automatically. If the choice is
not in its range, the modification will be canceled by pressing Enter and an error message will be displayed
to inform the user.