Kolver 035001, Manual

Page: 10 / 64

Vers. 291020
10
MENU PROGRAMS:
1- To return to the previous menu.
2- To return to the previous program.
3- Program in progress. If pressed to enter the desired program number through the numeric
keypad.
4- To move to the following program.
5- TORQUE & ANGLE: Access to the menu where the torque and angle functions can be set.
In the same line, the set values of the main parameters can be seen in small format.
6- RAMP & TIME: Access to the menu where Ramp, Run time, Min time, Max time and
Prevaling torque functions can be set. In the same line, the set values of the main
parameters can be seen in small format.
7- REV & PRE-REV: Access to the menu where Reverse Speed, Reverse Torque, Pre-Reverse,
Pre-Tightening Reverse, Autoreverse and Pre-Reverse Delay functions can be set. In the
same line, the set values of the main parameters can be seen in small format.
8- OTHER: Access to the menu where other functions can be set (Program description, Screw
number, Rotation, Serial Print, SWX88/CBS880, Barcode, Press OK, Press ESC, Error
Lever, …). In the same line, the set values of the main parameters can be seen in small
format.
1
5
1
1
6
7
8
2
3 4