10
© 2019 Kolpin Outdoors Inc.
REV 00
SPORTSMAN XP
550/850/1000 WINCH
INSTALLATION
(continued):
12.
Check and confirm wire
routing and connections
are as shown and make
necessary adjustments
before moving to next
installation steps. (See
illustrations 1
-
31 and
1
-
32).
13.
Install winch assembly
onto the radiator mount
with the four M8 hex
flange screws (item #3).
Check that all wires are free to move and not
pinched between the vehicle chassis and the winch
assembly. Access is easier by inserting the black
and red power cables first into window above front
gearcase as, then position winch assembly into
vehicle chassis as shown. (See illustrations 1
-
33
and 1
-
34).
14.
Tighten the four M8 screws (item #3) to torque
specification.
Ill. 1
-
31
Red
Cable
Black
Cable
Use this routing clip. Close two
wires and trim excess tie.
This cable tie
will not be
used and can
be removed
from this clip.
Ill. 1
-
33
Ill. 1
-
32
8MM FASTENER TORQUE:
17 ft. lbs. (23 Nm)
3
Ill. 1
-
34
3
