Innovative Network RTK Receiver
6) Choose ―
Date Collector Internet
‖ as your link device and click on ―
Setup
‖ to go on. Verify that the Data Port
of Port Options is
Shared
, then e
n
ter the IP address, port, assigned name and password for NTRIP connection,
after that
, when you back on Link Configure page then click ―
Connect
‖ again to start the NTRIP connection.
7) If the receiver connected to a mount point before, reconnect directly this mount point which has been stored on
handheld. Or request the whole sourcetable if you first time to connect the NTRIP broadcaster. Tap on ―
Request
Sourcetable
‖ and the available mount points for corrections will be downloaded to your handheld.
