Innovative Network RTK Receiver
And move to Base Start Mode, choose the starting mode for base station. In dropdown list, there are 3 options for
starting mode,
Manually Start Base
,
Automatically Start Base by Fixed Point
, and
Automatically Start Base
by Current Point
.
Manually Start Base:
If this mode is chosen, the base will not start even though the transmitting condition
achieves, it needs to click on
button or
button to start the base or stop the base whenever
you want if the base is ready.
Automatically Start Base by Fixed Point:
Choose this mode to make the base start automatically with a fixed
point once the transmitting condition achieves, pressing
button is not needed.
Automatically Start Base by Current Point:
Choose this mode to make the base start automatically with the
current position once the transmitting condition achieves, pressing
button is not needed. Click on
button to capture the coordinates for current position.
After the starting mode is chosen, then choose the correction type for transmitting such as RTD, RTCM30,
RTCM32, CMR and SCMRX. Open the dropdown list belongs to the correction field, then choose one of the
proper one correction type for the Base.
If all the parameters are completed, click on
button to confirm the settings, after a dialog pop
-
up to
prompt ―Submit Success‖ message, click on OK button, the Base is ready to start. If the automatically start mode is
selected, then the Base starts transmitting correction if appears the message ―Start Base Success‖ at
Status
field.
