Innovative Network RTK Receiver
Self
-
check:
Users can also do the self
-
check from this configuration page, click on the Check all button to check all
the modems or click on the check button corresponding to the modem to check one by one.
Clean EPH:
Click this button to clear the remaining epochs to let recever track the satellites better.
Factory Default:
Click this button to bring the receiver back to factory default setting.
Power Off:
Click this button to power off the receiver.
Reboot:
This is not supported on S680N receiver, that is why this button is not activated (grey).
System Setup
This page is used to control power saving, USB mode, default language for internal web UI and timezone.
Power:
Configure the receiver to use the power saving mode or not.
USB:
This is used to configure S680N receiver what kind of mode output from LEMO port when connect the
receiver with computer via L7U50 cable. USB and network port for optional.
Default Language:
Configure the default language for S680N internal web UI.
TimeZone:
This is mainly to setup the timezone for receiver.
Tips:
because S680N receiver doesn’t support the voice prompt, the option Voice Prompt and Voice Volume are
displayed in grey.
