Innovative Network RTK Receiver
6.4. How to use FieldGenius to configure S680N
As FieldGenius version 7.2.12.14 released, the S680 driver was built and we are able to configure S680N with this
driver as well in latest version of FieldGenius. In this section, we will take version 8.3.17.2 for example. Next you
will get the method how to use FieldGenius on S680N receiver.
1) Run FieldGenius program on your controller, then open an existing project or create a new one for your job.
2) After completing your project configuration, then establish the Bluetooth connection between controller and
S680. Tap on ―Select Instrument…‖ button to go into
Instrument Selection
interface, mark on the checkbox of
GNSS Rover option, then click on ―Edit‖ button to go on. If you ever connected the device before, please tap on
―Recoonect <GNSS Rover>‖directly to reconnect your device.
