57
9. Stake Out
The Stake Out mode have two functions, measuring the location of the stake out point and
stake out by the known coordinate from internal memory.
The coordinate data is stored in a COORD. DATA file. About internal memory, please refer to
Chapter “DATA”
*1 ) Please confirming that the instrument is in the main menu or angle measurement
mode when power off. It will make sure that the whole process of data import and export
already done, also prevent the data lost.
*2 ) It is recommended for safety to fully charge the batteries before operation.
*3 ) Please consider whether the internal memory is enough for recording new points.
For Stake out procedure as below:
1.
Choose coordinate data file
2.
Set station point
3.
Input or call the needed Stake-Out coordinate, and start.
