34
When doing coordinate measurement, you need to set coordinates of occupied point, the
instrument height, the prism height and back-sight azimuth at first.
Operation procedure
Operation
Display
①
Set the direction angle of
known point A *1
）
Set direction
angle
②
Aim at target prism B, and
press
key
Aim at target
prism
*1)Refer to Section 5.3 “Setting of Horizontal Angle”.
In the condition of lacking the coordinate of station point, (0,0,0) or the coordinate you input
last time, will be used as the default station point.
The prism height will be 0 if the prism height hasn’t been set.
