background image

03

•  Only the supplied charging station 

or charging stations compatible with 

the Bosch Power Tool 

 

Robert Bosch 

Power Tools GmbH –

 Professional 

Program (Table 1) may be used to 

charge the battery of the device. 

Safety instructions when using 

the device 

The device may pose a danger if the 

following instructions are not followed:

•  Do not touch the device with wet 

hands.

•  Do not immerse the device in water 

or do not clean it with a water jet. 

•  The device must be protected from 

moisture during storage. 

•  The included waterproof cover for 

battery protection must always be 

properly placed on the device during 

operation. 

•  Do not use the device without 

medium (dry operation) for more 

than 1 minute, otherwise mechanical 

damage may occur inside the device.

•  If there are obvious creaking noises 

when starting the device, the device 

must be switched off immediately 

and a small amount of water must be 

added to the device inlet. Otherwise, 

the pump may get damaged. The 

device can then be restarted. 

•  Do not use the device at ambient 

temperatures below 0 °C. 

•  The device may heat up after longer 

use, which is normal. Extra care is 

required when handling a heated 

device.

•  The device cannot be used when 

heated above 70 °C (overheating due 

to prolonged use, hot atmosphere). 

In this case, the device stops itself. 

Allow the device to cool before using 

it again.

•  In the event of low voltage 

(low battery), the device stops 

automatically. In this case, it is 

necessary to charge the batteries 

with the help of a charging station. 

•  The device may only be used for 

its intended use (General product 

information section) and within the 

technical specifications (Technical 

specifications section).

•  Before each use, it is necessary to 

carefully check if all components 

are technically flawless (no signs of 

damage).

•  It is forbidden to direct the jet from 

the device to electrical devices or 

electrical components.

•  Do not use the device to clean 

objects that contain toxic 

substances.

•  Do not pump cleaning agents, 

solvents or other flammable 

substances, as they may transform 

into a mist in the air that can ignite 

quickly.

•  Remove any stones, pieces of wood 

and similar debris from the object of 

cleaning, as the pressurized jet can 

move these particles uncontrollably, 

which can lead to damage to the 

device and / or operator. 

•  Use of the device is allowed only in 

daylight or sufficient artificial light 

and in dry weather with no rain.  

•  It is forbidden to use the device in the 

pools filled with water.

•  It is forbidden to use the device in 

the immediate vicinity of children or 

animals.

•  During use, the user must ensure a 

stable posture and position. 

•  When using the push-button lock 

function, the device must not be 

Summary of Contents for LIQUISHOT 25.3





























Reviews: