background image

01

1. General product information

Intended use of the product 

The product is suitable for outdoor 

use. The device is suitable for cleaning 

various surfaces that are resistant to 

the working pressure of the jet, and 

for spraying various agents on various 

surfaces. The device can be used for 

pumping water or various liquids for 

cleaning, degreasing and impregnation. 

The device is not suitable for products 

that do not withstand compressive loads, 

and for cleaning electronic devices and 

living beings. It is also not suitable for 

use with liquids that can cause self-

ignition, and for use in environments 

where self-ignition or explosion may 

occur. 

2. Safety warnings 

General safety warnings 

•  Repair and replacement of parts may 

only be performed by an authorized 

service center.

•  Persons over the age of eight, 

persons with reduced physical, 

sensory or mental capacity and 

persons with a lack of knowledge 

of the product may use the product 

only under the supervision and 

guidance of a suitably qualified 

person. Every user must be familiar 

with the possible dangers before use. 

Children are not allowed to use the 

device without the supervision of a 

responsible person.  

•  The device is not a toy; therefore, it 

is forbidden for the children to use it 

for play.

•  A standard connection must be used 

when connecting the device to the 

water supply.

•  It is forbidden to consume water 

pumped through the device.

•  The device, battery and charging 

station must not be exposed to heat 

or direct sunlight.

•  Before use, it is mandatory to 

read the instructions for use and 

safety instructions and save the 

documentation.

•  Appropriate clothing (long pants, 

gloves if necessary) and suitable 

footwear (not barefoot or in open 

shoes) must be worn during use.

•  In case of lending the product to 

another user, it is necessary to 

enclose safety instructions and 

instructions for use.

•  The product may only be used with 

the supplied attachments and spray 

accessories (nozzles). 

Safety instructions for 

rechargeable battery and charging 

station 

The device may pose a danger if the 

following instructions are not followed:

•  The mains voltage must correspond 

to the voltage indicated on the 

charging station. 

•  Compatible batteries: all batteries 

with a nominal voltage of 18 V by 

Robert Bosch Power Tools GmbH

 

 Professional program (GBA and 

ProCore series). An additional 

presentation of compatibility is 

shown in Table 1. Disposable 

batteries should not be recharged 

as this may result in spontaneous 

combustion, explosion and / or fire. 

•  The charging station and 

rechargeable batteries must be kept 

Summary of Contents for LIQUISHOT 25.3





























Reviews: