KOLEKTOR LIQUISHOT 25.3, Manual

Page: 13 / 28

10
• The empty battery is connected to the charging station for charging. The charging
station has an indicator on its bottom right side that flashes green while the
battery is charging. When fully charged, it stops flashing and only glows green, which
means that charging is complete. The rechargeable battery can be removed and used
at any time during charging.
• The charging station has another indicator at the bottom left that warns the
user in case of incorrect charging of the battery. If the indicator is ON continuously,
the battery temperature is outside the allowable temperature range. When the
allowable temperature range is reached, charging starts and the indicator turns off.
If this indicator flashes, an error occurred while charging. This may be due to a fault
in the battery or charging station. In this case, the user should remove the battery
from the charging station and clean the battery contacts with a dry cloth. If the
indicator still flashes, seek professional help or purchase a new set of battery and /
or charger.
Correct placing of the battery from the device to the charging station and vice versa is
shown in Photo 5.
The contacts must be dry and clean when placing and removing the battery on the
cordless pressure sprayer or charging station. After placing the battery on the cordless
pressure sprayer, it is necessary to place the included elastic waterproof protection over
the battery to protect it from water intrusion. It is forbidden to use the device without
the protection. It is recommended to remove the battery from the battery pressure
sprayer after its use, as removing the battery helps to prolong the life of the battery. The
procedure for removing waterproof protection is shown in Photo 6.
Photo 5: The procedure of placing the battery from the device to the charging station