KOLEKTOR LIQUISHOT 25.3, Manual

Page: 7 / 28

04
operated without the supervision of
a suitably qualified person, as this
may cause damage to the device,
the environment, or the user or third
parties.
• By changing the fluid flow rate
(rotation of the outlet flow / pressure
adjustment knob), the operating
pressure at the outlet of the cleaning
gun changes. High pressure can
damage sensitive surfaces. It is
forbidden to direct the jet at people
or animals.
• When using a device connected to the
water supply network, it is necessary
to check that the outlet pressure from
the water supply does not exceed the
permissible inlet pressure specified in
the technical specifications.
• When using the device with water
supply from the water supply
network, the inlet pressure of the
medium in the pump (outlet pressure
from the water supply network) can
be a maximum of 6 bar (600 kPa or
0.6 MPa).
• During pumping media with higher
temperature, special care should be
taken, otherwise burns and other
injuries could occur.
Special care on the device is
indicated by the symbol.