Kohler ZCB-6, Installation Instructions Manual

Page: 3 / 34

TT-1684 3/16 3
Model Designation
To interpret the transfer switch model designation, see the model designation chart in Figure 7.
Record the transfer switch model number in the boxes below. The transfer switch model number defines characteristics and
ratings as explained in the accompanying chart.
Model Controls Voltage and Frequency Poles Wires Enclosure Current Rating
Kohler
r
Part Number Key
This chart explains the Kohler
r
transfer switch model numbering system. The sample model
number shown is for a Model ZCB programmed-transition transfer switch with M340+
microprocessor electrical controls rated at 600 volts, 60 hertz, 3 phase, 3 poles, and 4 wires in a
NEMA type 1 enclosure with a current rating of 1000 amperes. Not all possible combinations
are available.
Switch Classification or Family
ZCM: 150--400 amp automatic transfer and bypass isolation switch
ZCB: 150--4000 amp automatic transfer and bypass isolation switch
Electrical Controls
5: M340+ microprocessor
6: M340+ microprocessor with programmed transition
Number of Poles and Phase
2: 2 pole, 1 phase 3: 3 pole, 3 phase 4: 3 pole, 1 phase
6: 4 pole, 3 phase
Number of Wires
3: 3 wire 4: 4 wire
Enclosure
0: Open unit* 1: NEMA type 1 2: NEMA type 12*
3: NEMA type 3R*
* Contact the factory.
Current Rating
Numbers indicate the current rating of the switch in amperes
ZCB-660341-1000
Voltage and Frequency (other codes possible)
53: 220 Volts, 60 Hz 60: 600 Volts, 60 Hz 62: 120 Volts, 60 Hz
63: 220 Volts, 50 Hz 64: 240 Volts, 60 Hz 66: 480 Volts, 60 Hz
68: 208 Volts, 60 Hz 71: 380 Volts, 50 Hz 72: 380 Volt, 60 Hz
73: 416 Volts, 50 Hz
SAMPLE MODEL NUMBER
Figure 7 Model Designation Key