Kohler ZCB-6, Installation Instructions Manual

Page: 13 / 34

TT-1684 3/16 13
Conversion Kit Wiring Harness
26. At this point in the procedure, you will start to
connect the conversion kit wiring harness.
D
Model ZCM switches use conversion kit harness
GM77518, included in kit GM99316-S4. See
Figure 36.
D
Model ZCB switches use conversion kit harness
GM77826, included in kit GM99316-S5. See
Figure 37.
27. Connect plug P24 of the conversion kit harness to
contactor harness plug P24, which was
disconnected from the M340+ controller in step 13.
See Figure 35.
28. Connect plug P1 of the conversion kit wire harness
to the MPAC 1500 controller. See Figure 35.
P1
PLUG
P24
PLUG
Note: This photo does not show the latest controller design.
See Figure 25.
Figure 35 Conversion Kit Harness Connection to
Controller Assembly (PTIB not shown)
GM77518
Figure 36 Conversion Kit Harness GM77518 for Model ZCM-6