:
II
TS_600_00 PW1000 1-3kVA User Manual 6/4/17
4.2.3 How the monitor the UPS input/output operating conditions
26
4.3 UPS shut down procedures
27
4.3.1 How to turn off the UPS (from ON INVERTER or ECO Mode)
27
4.3.2 How to turn off the UPS (from ON BATTERY Mode)
27
4.4 Manual load transfer between inverter and bypass
27
4.5 Functions menu
28
4.5.1 How to disable the alarm buzzer operation
28
4.5.2 How to perform a battery test
28
4.5.3 Functions menu
29
4.5.4 Operating parameters setting menu
30
Maintenance
31
5.1 Introduction
31
5.2 Scheduled maintenance
31
5.2.1 Preventative maintenance inspection
31
5.2.2 Battery maintenance and testing
31
Troubleshooting
33
6.1 Introduction
33
6.2 Fault identification
33
6.2.1 Error codes
33
6.2.2 Audible warning alarm
33
6.2.3 Warning symbols
34
6.3 Troubleshooting a fault condition
34
6.4 Troubleshooting an operational problem
35
6.5 UPS Fault handling
35
6.5.1 Output load short circuit when the output supply is via inverter
36
6.5.2 Output short-circuit when the output supply via the bypass line
36
6.5.3 Inverter/internal over-temperature
36
6.5.4 Inverter over-current and output voltage out of tolerance
36
6.6 UPS System reset
36
Options
37
7.1 Communications options
37
7.2 RS-232 Computer serial interface
37
7.3 Emergency Power Off (EPO) / Remote ON/OFF (ROO)
38
7.4 CS141 /SMNP adapters
38
7.5 AS400 (dry contact) card
39
Specification
40
