18
SERVICING
Inlet Connector
Assembly
Inlet Filter
Screws
Cover
Screw
Service
Tunnel
Hose
Washer
WARNING
There are no user serviceable parts inside the shower.
Servicing of the shower must only be carried out by qualified, competent
personnel following the instructions provided in this guide and those provided
with any spare part.
Before replacing any parts, ensure that the underlying cause of the malfunction
has been resolved.
Remove the shower hose.
Note!
Retain the hose washer
for further use
Remove the three screws that
hold the cover on the shower and
remove the cover.
Remove the service tunnel from
the shower.
Use a suitable spanner to remove
the filter from the inlet connector
assembly. Hold a wrench across
the flats of the inlet connector
assembly to prevent damage to
the connector, whilst removing
the filter.
Remove the filter and rinse under
a running tap to remove any
lodged particles. If necessary, use
a kettle descalent in accordance
w i t h t h e m a n u f a c t u r e r ’s
instructions.
Refit the components in reverse
order.
Cleaning the Inlet Filter
Warning!
Isolate the electrical and water
supplies before removing the cover.
2
4
5
3
6
1
